x
3 piece, 37 1/2″ (L= 950 mm) D 36.
Polypropylene (PP) with air regulating slide to adjust suction power. To connect tubes to extraction hose for comfortable grip.
3 piece, 37 1/2″ (950 mm) D 36.
Plastic. Width 11-13/16″ (300 mm). 2 casters, 2 brush inserts.
4-piece, plastic. With 3 replaceable inserts (brushes, rubber lips, carpet)
For carpet and hard surface with 4 casters.Width 10-5/8″ (270 mm). Suction-activated rolling brushes, requires 36 mm hose.
Plastic, lenght 11-13/16″ (300 mm)
Plastic, diameter 2-13/16″ (70 mm).
High-quality industrial design; aluminum. Width 14 5/8″ (370 mm); 2 casters, 2 brush inserts.
Get the most out of your CT Dust Extractor investment by pairing it with a Festool cleaning set. The Industrial Cleaning Set is an ideal solution for commercial settings with larger debris and heavier cleanup needs. Keep this set within easy access for quick and easy cleanup, helping you to leave a cleaner, safer work environment. The Industrial Cleaning Set features large diameter (50mm), ridgid polypropylene construction. Includes: 50mm x 2.5m non-Antistatic hose (452887), 50mm polypropylene extension tubes (qty 2)(440412), 50mm polypropylene worksop floor nozzle (452909), 50mm polypropylene square nozzle (440416), 50mm polypropylene large crevice nozzle (452912), and 50mm polypropylene suction brush (440419).
The perfect cleaning accessory set for use with vacuums and dust extractors. Includes one (1) general crevice nozzle, one (1) upholstery brush and one (1) round brush. Made from plastic, these accessories are design to prevent accidental damage to surfaces when dropped, such as hardwood floors.
Plastic universal nozzle with brush rim and rotating hinge. Accepts D 27mm and D 36mm hoses and tubes.
The combination of Bluetooth® module on the CT Dust Extractor and remote control on the extractor hose saves you a trip to the extractor. Simply start the dust extraction from the hose using the remote control. Ideal for small, occasional cleaning tasks – simply switch to cleaning mode, even when the CT Dust Extractor is in AUTO mode. The Bluetooth® module on the CT Dust Extractor communicates with the Festool Bluetooth® battery packs in addition to the new remote control. These battery packs ensure that even a cordless tool starts the CT Dust Extractor automatically when switched on. This now enables you to benefit from Festool’s entire dust-free system when working with Festool cordless products too.
The new suction hose: Smooth elastic, conical – with smooth outer skin for significantly improved handling, a longer service life and increased suction power. It can be extended to meet your individual requirements by connecting two suction hoses. The new Cleantec extraction sleeve ensures a secure fit on the tool.
The new suction hose: Smooth and elastic – with smooth outer skin for significantly improved handling, a longer service life and increased suction power. The new Cleantec extraction sleeve ensures a secure fit on the tool.
Filter Bag captures and contains dust and debris for easy and clean disposal. Optimum utilization of filter bag volume thanks to SELFCLEAN filter material, optimised for cleaning. Collapsible bag design eliminates dust cake between cycles, delivering full and sustained suction foce and longer bag life. Compatible with CT MIDI I and CT MINI I dust extractors.
Long-Life Filter Bags Sturdy, reusable bag is ideal for collecting coarse chips and debris, lasting up to 500 uses. Fast, easy and secure installation and removal eliminates downtime. Compatible with CT MIDI I and CT MINI I dust extractors.
Designed to trap particles down to .3 microns while maintaining airflow, allowing you to reach full capacity without clogging or caking. There is no better filtration on the market today. Includes 1 HEPA Filter Elements.
For jobs where wet extraction is needed, protect your CT MINI or CT MIDI by using the Wet Filter Element to prevent foam build up inside the container from reaching the CT motor. Open cell foam sponge can be washed and dried quickly after each use. Includes 1 Wet Filter Element.
Configurable and adjustable Shoulder Strap included with CT SYS for ease of transport. Compatible with T-LOC SYSTAINERS.
Supplied with and stores inside the CT SYS.
Length 6” (150 mm). Accepts D 27 mm and D 36 mm hoses and tubes. Included with CT SYS.
Re-usable heavy-duty Filter Bag with integrated cap. Designed for easy and fast debris disposal. Compatible with the CT SYS mobile dust extractor.
Filter Bag captures and contains dust and debris for easy and clean disposal. Compatible with the CT SYS mobile dust extractor.
Standard 1 micron filter—paper. (1 piece)
Length 43-1/2″ (1100 mm), Diameter 50 mm
The Festool Non-Antistatic Hose is designed as an economical option for use with non-antistatic dust extraction systems or vacuums. The 27mm Non-Antistatic Hose will fit or adapt to the Festool CT Dust Extractors and Festool cleaning sets. A rotating connector prevents twisting and kinking, helping you work more efficiently, and a tight-fitting reducing sleeve adapts for secure inside or outside fit to tool or cleaning accessory.
For use with cleaning sets or non-antistatic dust extractors. With rotating connector and reducing sleeve.
2-piece, Length 38″ (970 mm), Diameter 50 mm.
Festool’s Antistatic hose design helps you work cleaner by preventing dust from accumulating on the exterior of the hose. It helps you work more safely by preventing static discharge or shocks. And you’ll work more efficiently with a system that prevents clogging due to particulate buildup inside the hose. A durable, pliable design withstands heavy use and prevents kinking, for longer service life and more efficient work. Includes: 50mm X 2.5m (1 15/16 in x 8.25 ft) Antistatic hose with two rotating connectors.
Save time changing between drill and screw bits with the quick-change Centrotec System. Large Industrial Floor Nozzle
Plastic, length 14 5/8″ (370 mm)
Festool’s Antistatic hose design helps you work cleaner by preventing dust from accumulating on the exterior of the hose. It helps you work safer by preventing static discharge or shocks. And you’ll work more efficiently with a system that prevents clogging due to particulate buildup inside the hose. A durable, pliable design withstands heavy use and prevents kinking, for longer service life and more efficient work. Includes: 50mm X 4m (1 15/16 in x 13 ft) Antistatic hose with rotating connector and reducing sleeve.
Easily transport CT to and from the jobsite or around the shop. Easily attaches to rear of CT. Especially well-suited when using the CT to transport SYSTAINERS latched to the integrated SysDock. Includes integrated nozzle and tube storage. Includes all hardware necessary to be mounted. Compatible with CT 26 and CT 36 models.
Work more efficiently by keeping your tool right at hand. Tool-free installation on the top of the CT unit. Holds one tool. Compatible with all Festool sanders and Festool DOMINO. Compatible with Festool CT 26/36 Dust Extractor models. Includes one (1) tool holder.
Mounts to the front of the dust extractor unit to supply air via the IAS 3-in-1 hose (sold separately) to drive Festool LEX model air sanders. Ideal for sanding applications in high-production environments. Drives pneumatic sanders with tool-triggered activation. Compatible with Festool CT 26/36 Dust Extractor models.
The Workcenter WCR 1000 will help you organise and arrange your workplace more effectively and provides a convenient way to keep the tools you are working with at hand, without getting in your way. The Workcenter can be mounted easily to almost any Festool dust extractor which allows it to be moved freely about the shop or jobsite. Adjustable height columns allow for the storage of several Systainers as well as placing tools at a convenient height (adjusts between 21-15/32 inches and 30-29/32 inches in height). With many options for hanging a variety of hand tools and power tools, the Workcenter provides a flexible, portable, and convenient way to organize your workspace for greater efficiency. Compatible with Festool CT 22, CT 33, CT 26, CT 36, and CT 48 models. Includes one peghook tray, one universal double hook, one double hook tool rest, one pivoting storage tray and six peg hooks. Additional accessories can be purchased and added separately.
The integrated bayonet fitting connects the connecting sleeve on the suction hose securely and quickly to the extractor connector on the power tool, and it can be detached just as quickly. You decide when, not chance. It can be used for tasks from sawing to routing, whether in the workshop or on-site. This enables work to be carried out efficiently, cleanly, and systematically and reduces hazards to health. Dust-free.
Developed to provide optimum protection for surfaces and significantly improved handling. The protective sleeve encasing the suction hose is made from 100% nylon, allowing it to glide gently over surfaces and edges, while the integrated plug-it-cable is protected against damage.
The new Cleantex CT 26 dust extractor features a self-cleaning filter bag that solves a problem that plagues other dust extractors and vacuums. During normal use, fine particles of dust cling to the inner lining of the filter bag resulting in caking. This coating of dust lowers the effective suction power dramatically resulting in poor extraction efficiency and performance. Caking can also cause additional strain on your dust extractor’s motor and contribute to premature failure. Festool has addressed this issue by developing a unique pliable fleece filter bag. Because the bag is not rigid like many other types of bags, such as paper bags, it prevents caking. This means that your Festool CT 26 dust extractor continues to deliver full suction until the bag is virtually completely full. Other manufacturers feet bags do not counter this caking effect and suction is reduced dramatically throughout the use of the bag, often resulting in a situation where suction is lost before the bag is completely full. When this occurs, you’re paying full price for a partially used bag. The Festool filter bag also serves as a pre-filter and is able to trap dust particles down to five millionths of a meter, or 5 microns. This is about the same size as a red blood cell. By arresting these small particles, in addition to larger chips, the bag extends the life of your main HEPA filter, reducing wear and tear as well as the expense of frequent filter replacement. Bag disposal is quick and mess-free. An integrated closure on the bag shuts the opening to prevent spilling. The material is made to be tear resistant and prevent bag blow outs which can be messy to clean up. Now, that’s smart.Includes five (5) bags.
The highest standard for filtration, HEPA filters capture 99.99% of all particulate matter down to .3 microns. HEPA filters (High-Efficiency Particulate Air) have quickly become the new standard for wood dust collection, both in the workshop and on the jobsite. Measured in microns, wood dust is particularly troublesome to remove from an environment once it is airborne. The best way to minimize the effects of dust created during fabrication is to use tools that are designed with dust extraction in mind. When partnered with a good dust extractor with proper filtration, you will be able to eliminate the majority of the dust created at the source before it is ever released into your environment. Designed to trap particles down to .3 microns while maintaining airflow, allowing you to reach full capacity without clogging or caking. There is no better filtration on the market today. Includes 1 HEPA Filter Elements.
x<
