Vintage Velatura Siloxane is a finishing protective and decorative coating for exterior and interior works, based on acrylic-siloxane polymers with the addition of auxiliary substances. Velatura Vintage can be applied to both smooth and textured surfaces. Due to the use of special additives this topcoat provides effective protection against aggressive atmospheric influences as well as creates a waterproof barrier.
The surface must be cleaned of dirt, dust and completely dry. Additional treatment using primers is not required. Material should be mixed thoroughly before use. Add up to 10% of water if necessary. To achieve the Â«light patinaÂ» effect you should add universal dyes or use computer tinting system. Apply to the prepared surface using a brush, roller, paintbrush or sponge glove in accordance with the desired effect. Wash tools with water immediately after use.
CASTELLO is an exquisite decorative coating that is specially designed for exterior and interior works. Ground natural travertine of various factions is the main filler in this product. CASTELLO takes the form of natural travertine stone after application through the use of special acrylic polymers and other auxiliary substances.CASTELLO also includes special synthetic reinforcing fibers that give excellent characteristics to this product. You can achieve a variety of surface textures due to the special structure of this material. Produced in beige base color.
The surface before application must be solid, dry and free from dust, oil and grease. Places affected by mold and moss must be cleaned mechanically and primed with primer D 07 ELFâ„¢ or other special agents. Apply quartz-primer QuartzPrimer or quartz-primer D 17 ELFâ„¢ on the prepared surface and wait until itâ€™s completely dry (fig. 1).
The material can be applied in one or two layers. When applied in 1 layer it is recommended to use the quartz-primer previously tinted with the selected color. The coating should be applied evenly on the surface with a thin layer and then use the â€œpullingâ€ technique over the entire surface with the help of stainless steel bevel (fig. 2).
After 10-15 minutes (after stabilization of moisture) begin to smooth the material to compact, seal and level the surface with a stainless steel bevel (fig. 3).
Once the surface begins to dry up it is necessary to continue treating the surface using a plastic bevel to avoid blackening of the surface (fig. 4).
When the coating is applied in 2 layers use the same application technology as for Travertino Style (refer Travertino Style application technology), but use the plastic bevel in order to avoid blackening.You can achieve the look of a natural polished travertine stone by treating surface with the use of electro-polishing tool after the complete drying of the product (24 hours).It is recommended to use such top coats as Finitura Castello or Velatura Vintage for Castello coating (fig. 5).
It is possible to tint Castello using universal colorants as well as using a computer tinting system. Also you should tint the top coats for Castello using universal colorants Decotoner or Toscana Toner or using a computer tinting system to achieve the patina effect.
DECOR WAX is a special wax for the treatment of decorative coatings indoors. It is a mixture of special synthetic waxes in an aqueous dispersion of acrylic polymer with the addition of auxiliary refining substances.
DECOR WAX WHITE is a wax with the addition of a natural white pigment. It is used to give decorative coatings an additional effect of aging and bleaching.
FEERIE is a modern pearl decorative coating used for interior work. An individuality and unique beauty of this material appears due to the combination of a sparkling base and round glass crystals in its composition. As well as sparkling pearl particles included in the composition of FEERIE which create a scintillation effect.
This product is highly durable and very easy to apply. Produced in WHITE SILVER and WHITE GOLD colour bases and in a TRANSPARENT base.
Combination with different decorative materials such as ILLUSION, MIRAGE, SPECIAL WAX and AZURE gives you opportunity to achieve an interesting and unusual design solutions.
Apply tinted DECOR PRIMER on the surface that was previously treated with D 11 ELFâ„¢ primer (fig. 1). Tinting can be done using universal dyes manually by color chart or using a computer tinting system. Wait until it’s completely dry. Or apply the decorative base coat according to the application technology of the selected product when applying FEERIE TRANSPARENT base. The material should be stirred thoroughly.
IMPORTANT: do not use an electric mixer for stirring so as not to shatter the structure of the material.
Apply the product using a flat wide brush by making random movements and spreading it evenly over the surface (fig. 2).
Group the crystals on the surface using a dry brush, thus obtaining the desired decorative effect (fig. 3).
It is possible to get other interesting design solutions by processing the surface with plastic bevel, slightly pressing the crystals and spreading them over the surface additionally. You can tint FEERIE base as well as mix FEERIE bases of different colors together for additional decorative effects.
GROTTO decorative coating is based on natural lime. It is now used widely for decoration of interiors and facades. This material has a high vapor permeability and antifungal properties. It has proved remarkably effective in humid environment. GROTTO is your unique opportunity to create your own breathtaking interior with various decorative solutions. It is possible to obtain a variety of textures due to its special composition using different techniques of application.
ILLUSION is a smooth decorative coating with sparkling nacrous play and particles of golden and silvery granules. ILLUSION differs from similar materials increased strength. Available in bases SILVER, GOLD, WHITE GOLD.
The surface texture visually changes depending on the direction of light that is the main feature of this product.
ILLUSION CRYSTAL is an ultra-sparkling and ultra-trendy pearlescent decorative coating. The main difference from ILLUSION decorative coating is the presence of small glass particles in composition of ILLUSION CRYSTAL that create a unique glow and play of colours on the surface.
Protective-decorative wax for smooth and finely-structured interior surfaces. It is a combination of several types of waxes with the addition of special natural ingredients. Specially designed as a topcoat for Venetian plasters. You get a water-repellent coating with a deep gloss after applying.
METALPAINT is a universal metallized water-soluble paint. Used for indoor and outdoor work as a high-protective and decorative varnish paint. It is a high-quality aqueous dispersion of acrylic polymers and high-quality metallized pigments with the addition of enriching substances. Can be applied to the surfaces made of metal, gypsum, stone, wood, concrete, polystyrene as well as on plastered surfaces. Available in Royal Gold, Icy White and Aluminum colors.
MURANO is a Venetian plaster created with the use of natural mineral fillers and acrylic binders that is suitable for interior work. This luxurious material creates the effect of polished marble. A special formula allows you to achieve saturated tones with economical dye consumption. Tinting is performed by use of universal dyes in an amount of no more than 6% of the mass of the material.
MIRAGE is a decorative coating for interior works that lovers of sophisticated style perfectly agree with. A unique velvet-like surface with an original metallic and pearlescent effect give your interior a special charm.
The material is very simple to apply and pleasant to the touch. Available in SILVER and GOLD colour bases. Also available in WHITE GOLD base on request.
Choose the needed MIRAGE colour base and stir it well while adding a dye to achieve the desired color of the product. Apply the first layer of material using plastic or stainless steel bevel spreading evenly the product over the surface (fig. 2).
MARMORINO STYLE is a decorative coating based on natural lime. It is created on the combination of modern technologies and secrets of Italian masters.
Composition of this unique decorative material allows you to imitate the structure of natural marble. MARMORINO STYLE will create an atmosphere of antique luxury and a special coziness in your home as well as the uniqueness of the interior.
The result will pleasantly surprise you and satisfy your highest requirements. MARMORINO STYLE coating can be applied in a variety of shades and colours, as well as in various application techniques.
PERSIA decorative coating allows you to create a variety of types of textures in your interior because of a variety of application techniques. An unusually smart and noble appearance is created due to the combination of small particles of marble and pearlescent base of this product.
PERSIA is a water-soluble material, produced in three bases: WHITE, SILVER and GOLD. The WHITE base differs from the SILVER base with increased whiteness and ultramodern sparkling pigments in its composition.
QUARTZ PRIMER is used for interior and exterior work before applying decorative coatings and plasters as a primer to improve adhesion. It is a mixture of pigments, fillers and various auxiliary substances in an aqueous dispersion of acrylic polymers with the addition of ground quartz grain. It is applied to plasterboard and fibre-cement slabs, concrete, brick, cement and lime-cement plasters, as well as putty surfaces.
SAHARA is a pearlescent decorative coating used for interior work. A combination of quartz particles and nacreous base makes this coating look elegant with its own natural charm. This product is very easy to apply. Available in SILVER and GOLD colour bases. Also available in WHITE GOLD colour base on request.
TOSCANA is a decorative coating based on natural lime for interior and exterior use. Due to its special types of mineral fillers the coating appears with a honourable matte effect. You can achieve different textures that imitate natural materials by applying this product in different ways. As well as natural mica contained in this product gives more charm to the surface.
TESORO is a unique decorative coating for interior works that was designed especially for creating interesting and unusual design solutions. This product will perfectly fit classic interiors as well as any ultra-modern space.
To achieve the desired color of TESORO coating just add the selected TESORO TONER dye as well as add metallized pigments TESORO GOLD or TESORO SILVER if necessary to the container of TESORO base.
To achieve the color that was previously selected from the catalog, according to the recipe, you need to add the selected colorant TESORO TONER (75 ml) to TESORO decorative coating base (2.5 l), and add metallised pigment TESORO GOLD or TESORO
Apply TESORO using a flat wide shortened brush crosswise downward randomly spreading the product over the entire surface (fig. 2).
RAVERTINO STYLE is a natural lime coating used for indoor and outdoor application. This material perfectly conveys the medieval Italian style as well as looks great in a modern interior. The product creates a durable, wear resistant and strong coating. The use of colored waxes will give an additional effect: you can achieve a variety of color shades and emphasize the texture. Produced in WHITE and BEIGE colour bases. Also available in BLACK and WENGE colour bases on request.
DECOR WAX TOSCANA is a matt decorative wax designed to achieve a variety of effects used in interior decoration. It is a mixture of special synthetic waxes in an aqueous dispersion of acrylic polymer with the addition of auxiliary refining substances. A special formula allows you to apply it in a variety of techniques from conventional painting to patination and rubbing.
VENEZIANO STYLE is a decorative covering for interior works. It is a Venetian plaster based on aged lime of the highest quality, fine marble powder and other natural ingredients. This ancient technology allows you to achieve an effect of polished and shiny marble. This lime-based Venetian plaster is permeable and absolutely Eco-compatible as well as durable that has been proved by centuries of use.
VARNISH PROTECT is used to protect the surfaces of thick-layer decorative plasters such as Itaka, Canyon, Riviera, Country, Grotto, Travertino Style, Africa, etc. Varnish protects the surface from dirt and makes it detergent resistant. It is a mixture of special high-quality aqueous dispersions of acrylic resins with the addition of ennobling substances. Suitable for indoor and outdoor work.
© 2021 Loconsolo Paints, 2660 Coney Island Avenue Brooklyn, New York 11223 | firstname.lastname@example.org | Powered by MILE Social