Arch-Flex 333 is the first arch product that comes on a roll. Designed for all radius curves, Arch-Flex also resists dents and paint chipping, cuts easily with a utility knife or scissors, is applied with all-purpose joint compound, and will not rust. The tape is manufactured with patented tear strips to create easy straight-to-curve transitions. To apply, measure entire curved application by using Arch-Flex 333 as a tape measure. Cut to measured length plus 1 in. Fold Arch-Flex 333 completely in half at crease and remove tear strip by folding along perforations and pulling. Leave tear strip intact where a straight-to-curve transition is required. Apply all-purpose compound to corner. Starting from 1 end, press Arch-Flex 333 firmly into compound. Re-cut length to fit if needed. Wipe down compound and adjust to a smooth curve. Apply second coat immediately and let dry. Apply final coat, let dry, and sand.
Fast-loading plated steel dispenser holds all paper and fiberglass drywall tape rolls up to 2-1/4″x500′. Hangs from belt. Tape threads easily through dispensing slot for quick feed and clean tear-off. Lift retaining pin to change rolls.
FIBATAPE FLEXIBLE METAL CORNER TAPE
The world’s first fiberglass drywall joint tape – contractor grade. Specially formulated adhesive designed to excel in varying humidity levels and temperatures. Requires no pre-plastering, which also reduces drying time. Open fiberglass mesh eliminates blisters and bubbles. Mold-resistant (unlike paper tape).
FibaFuse is an innovative paperless drywall joint tape designed for professional renovators and remodelers. FibaFuse is a glass mat drywall tape that is ideal for use with mold-resistant and paperless drywall systems for high-humidity and moisture-prone applications. FibaFuse is easy to cut and retains its folds, making it easy to install by hand on joints in corners. You can also use Super tapers, banjos and automatic tapers to apply FibaFuse and compound to seams.
G-FORCE WALL REPAIR PATCH
G-FORCE SELF ADHESIVE FIBERGLASS MESH JOINT TAPE
Original straightens common framing irregularities for vertical off angles. From the Manufacturer STRAIT FLEX SO-100 2 3/8″ X 100′ ORIGINAL COMPOSITE TAPE. Original straightens common framing irregularities for vertical off angles
Patch walls, ceilings and hollow core doors fast to last. Self adhesive fiberglass mesh eliminates the need for pre-plastering. Perforated aluminum plate covers without additional backing. Works with drywall, plaster, wood and most other materials. Will not rust or bleed through.
Use these strong, cross-fibered tapes with our joint compounds to reinforce joints and corners.
Sheetrock® Brand Joint Tapes can be used for joint treatments in veneer finish systems that are subject to rapid drying conditions and where framing exceeds 16″ (406 mm) spacing.
© 2022 Loconsolo Paints, 2660 Coney Island Avenue Brooklyn, New York 11223 | email@example.com | Powered by MILE Social