Visit our Benjamin Moore Paint Stores in Brooklyn & the Bronx!
3M 3X HIGH STRENGTH PATCH PLUS PRIMER SMALL HOLE REPAIR
x
262 LIGHTWEIGHT BODY FILLER W/CAP & HARDENER
Bondo red cream hardener is designed to be used with bondo body fillers, bondo-glass bondo-hair and fiberglass resin jelly. Formulated and packaged under temperature-controlled conditions which assures freshness and maximum performance
ALEX PLUS Spackling provides unsurpassed performance for filling holes & cracks in surfaces such as drywall, plaster, wood, brick, metal, and stone. Its ready-to-use, smooth white formula spreads easily for fast, professional repairs that will not sink, shrink or crack.
A ready-to-use mixture ideal for patching small cracks and breaks, or to spot level concrete and masonry surfaces such as basement walls, patios, steps, sidewalks and driveways. Hardens to a durable finish and is non-shrinking. Interior/exterior use.
Professional quality formula for repairs in plaster walls and ceilings. Provides longer working time of 2-3 hours. Easy to mix, use and sand. Interior use.
Plaster of Paris is for general wall and ceiling repairs. Sets fast in 20-30 minutes without shrinking. Smooth formula provides great results every time. Can also be used to mix your own DIY version of chalk finish paint. Interior use.
12019 ’33’ READY MIXED WINDOW GLAZING COMPOUND
Vinyl Spackling is an all purpose formula that is perfect for household repairs. Interior use.
12330 DRYDEX RTU DRY TIME INDICATOR SPACKLING
DASH PATCH FLOOR LEVELER
Plaster-Weld® bonds new plaster to any clean, structurally sound, interior surface. The original chemical plaster bonding agent is a patented formulation incorporating polyvinyl acetate homopolymer. DESIGNED FOR INTERIOR USE ONLY, the high performance bonding of one-coat finish plaster and/or two and three coat work to concrete ceilings, walls, columns, beams, and other structurally sound surfaces. Plaster-Weld® prepares the surface to allow you to plaster directly to concrete over electric radiant heat cable, and to bond cement mortar beds to smooth concrete for installation of rigid foam insulation. Concrete, brick, block, glass, ceramic tile, wallboard, metals (e.g. sheet lead in x-ray rooms) and marble are suitable sound surfaces, structurally. Plaster-Weld® can be used over paints having oil, rubber or vinyl bases, and over silicone-treated surfaces, as well as latex paints.
Weld-Crete® bonds new concrete, stucco, tile setting beds and terrazzo to any structurally sound surface, interior or exterior. Use Weld-Crete’s® open time to your advantage in bonding to concrete shear walls when you need a time lapse between application of bonding agent, placement of reinforcement steel, placement of formwork and placement of concrete.
The original chemical concrete bonding agent, Weld-Crete® incorporates polyvinyl acetate homopolymer in a patented formulation. For exterior and interior use, Weld-Crete® will bond new concrete, Portland cement plaster and cementitious mixes to structurally sound concrete floors, walls, columns, beams, steps and ramps. Weld-Crete® can be “painted on” in a single application 1 hour to 10 days prior to concrete placement. Use Weld-Crete’s® open time to your advantage in bonding to concrete shear walls when you need a time lapse between application of bonding agent, placement of reinforcement steel, placement of formwork and placement of concrete.
Weld-Crete® is also used for: bonding setting beds for ceramic tile; bonding Portland cement plaster and stucco mixes; and to bond to surfaces such as brick, block, tile, marble, metal, glass block, soundly adhered paint (non-soluable in water, i.e. casien and calcimine paints), and silicone.
AQUA PLUG’s instant fit can be achieved in 2-3 minutes to stop pressure leaks on concrete and masonry surfaces. This quick set allows the AQUA PLUG to mechanically and chemically bond to saturated surfaces. Uses and Applications: Stops flow leaks in concrete bolts and rebar. Seals cracks and floor and wall joints.
QUIKRETE 40 LB CONCRETEMIX 11014
A blend of masonry cement and graded sand. A long lasting, strong bonding mortar. Just add water an mix to desired consistency.
Quikrete’s original high strength blend of Portland cement and graded sand. Excellent for repairing or resurfacing cement surfaces.
Specially graded sand that has been washed, dried, and screened. Available in easy to carry plastic bag. (L.I. Cowbay Sand)
Red Devil ONETIME Lightweight Spackling makes repairing walls and ceilings fast and easy! It fills cracks, dents, nailheads and other holes in just a single applications. This premixed formula goes on smoothly, dries quickly and can be used indoors or outdoors. It won’t shrink, sag or crack after being applied, and because it’s so lightweight, it requires no sanding.
SHEETROCK Brand QT Medium 40 lb. Spray Texture is ideal for new ceilings and for renewing old ceilings, providing an attractive acoustical appearance. It can also help hide minor surface imperfections. Can be applied over treated plaster and concrete substrates and gypsum panels.
Structo-Lite® Basecoat Plaster is applied by hand or machine methods, on gypsum or metal lath, clay tile, concrete or cinder blocks and other approved plaster bases to provide a lightweight, high-thermal-conductivity conventional plaster application.
Thoroseal waterproofing, cement based, heavy duty, waterproofing / damp proofing powder for concrete, may be used to fill, seal, waterproof & protect masonry surfaces, comes in dry powder form, must add acryl 60.
Used for a variety of applications including: filling, smoothing and finishing interior concrete ceilings.
Sheetrock® Brand Easy Sand™ Joint Compounds provide low shrinkage and superior bond, which make them excellent for laminating gypsum panels to gypsum panels, sound-deadening boards and above-grade concrete surfaces. They resist humidity and can be applied in damp weather allowing for same-day joint finishing and faster job completion and are available in a range of formulations that provide a choice in setting times from 8 minutes to 3 hours.
Sheetrock Easy Sand 20 Lightweight Setting-Type Joint Compound is ideal for heavy fills in drywall interiors and exterior ceiling boards. The compound is lightweight for easy handling and sands easily for fast, smooth finishing. With its low shrinkage and superior bond, it is excellent for laminating drywall and patching plaster surfaces.
Sheetrock Brand Easy Sand 45 Lightweight 18 lbs. Setting-Type Joint Compound is ideal for heavy fills in drywall interiors and exterior ceiling boards. The compound is lightweight for easy handling and sands easily for fast, smooth finishing. With its low shrinkage and superior bond, it is excellent for laminating drywall and patching plaster surfaces.
SHEETROCK Brand Easy Sand 90 Lightweight 18 lb. Setting-Type Joint Compound is ideal for heavy fills in drywall interiors and exterior ceiling boards. The compound is lightweight for easy handling and sands easily for fast, smooth finishing. With its low shrinkage and superior bond, it is excellent for laminating drywall and patching plaster surfaces.
Versatile all purpose joint compound providing professional-grade performance.
Vinyl formulation makes it an ideal drywall mud for finishing over fasteners, bead and trim.
Sheetrock® Brand Midweight™ Joint Compound is an easy working and sanding, high-performance joint compound with multiple applications: embedding paper tape; filling, leveling, and finishing gypsum panel joints, fasteners, bead, and trim; skim-coating; and hand-applying simple textures.
Specifically designed with the finishing contractor in mind, this compound allows greater control and accuracy with less fatigue at the end of the day.
Sheetrock® Brand UltraLightweight Joint Compound is a professional grade product that provides great results with less effort.
All-purpose compound weighs up to 25% less than conventional-weight compounds so handling and applying are simpler, easier and faster.
Sheetrock® Brand Plus 3® Joint Compound provides all the benefits of a conventional product with these Plus 3® advantages:
Quick-setting drywall mud that provides low shrinkage and superior bond.
Sheetrock® Brand Durabond® Joint Compounds provide a hard, plaster-like surface when dry and are virtually unaffected by humidity.
USG Sheetrock® Brand Cover Coat® Compound is a premium grade product designed for fi lling and smoothing monolithic interior concrete ceilings and columns located above grade. Factory mixed for consistently high quality and smooth application, USG Sheetrock® Brand Cover Coat® Compound is easily applied with drywall tools.
USG Sheetrock® Brand Cover Coat® Compound provides an excellent bond that resists flaking,chipping and scuffing. USG Sheetrock® Brand Cover Coat® Compound dries to a fine, white surface; usually no further decoration is necessary on noncontact areas. USG Sheetrock® Brand Cover Coat® Compound is not washable unpainted and may be decorated if desired.
USG Sheetrock® Brand Cover Coat® Compound can be used for embedding drywall tape; first fill coating on bead, trim and fasteners; texturing; and is an excellent product for skim coating drywall.
SHEETROCK Brand Durabond 45 25 lb. Setting-Type Joint Compound allows for one-day drywall finishing and next-day decoration of drywall interiors and exterior soffits. Compound is ideal for heavy fills and are virtually unaffected by humidity. It provides low shrinkage and superior bond, making it excellent for projects like laminating drywall and patching plaster surfaces.
All-purpose tool for applying a variety of liquid compounds on rough or smooth masonry surfaces
Oil-based primer for use on interior or exterior* surfaces.
Surfaces: Extremely high-build sanding primer
Applications: Doors, walls, windows, cabinet work and furniture.
Brushing Putty is an interior primer which can be easily sanded to a glass-smooth finish. This primer offers superior filling power and is recommended for use with open-grained wood which will be receiving a Hollandlac or ECO finish. Brushing Putty will conceal grain patterns effectively even in oak and luan! Brushing Putty is ideal for restoration work as it will serve to fill and conceal minor nicks and dents in all wooden surfaces.
Brushing Putty has five times the filling ability of ordinary primer.
Brushing Putty is off-white in color.
*Brushing Putty must be over-coated with FPE Oil Primer/ Undercoat prior to painting on both Interior and Exterior applications.
Wood surfaces should be lightly sanded.
Surfaces contaminated by oil or grease should be cleaned with a solvent.
Tools: Do not use a high quality brush for this material. Use an inexpensive natural bristle or synthetic brush.
For the best possible application and easier sanding, it is recommended that Brushing Putty be thinned by 5% with Penetrol.
Apply a full, even coat, and allow to dry for twelve to sixteen hours before sanding with a palm sander – 200 grit – to a glass-smooth finish. If additional filling is required, apply second coat and repeat sanding process.
Interior or exterior, oil-based knifing filler skim coat for the perfection of substrates.
Surfaces: Plaster, wallboard, wood or metal
Applications: Walls and ceiling, doors, trim, furniture, and metal or wood cabinets
Size and color: 1 kg. Natural off-white only.
In Northern Europe, this product is referred to as Swedish Putty; in France it is more commonly known as Enduit (on-dwee). It is a most unusual filling compound which has been used by European craftsmen since the eighteenth-century to produce spectacular results. With this material and a bit of patience, it is possible to obtain glass-like surfaces by applying very thin coats which are subsequently sanded with a fine grit paper (wet or dry). When sanding swedish putty dry, a mask is recommended.
The basic ingredients have always been finely ground titanium dioxide and silicates, combined with linseed oil and varnishes. Until recently, this material was mixed at the jobsite according to jealously guarded secret family formulas. Today, it is available from the factory for both interior and exterior use.
Swedish Putty should be applied in multiple thin, even coats in order to produce a substrate free of imperfections. Swedish Putty may be applied on non-flat surfaces such as moldings and trim with a sponge impregnated with linseed oil. This material is frequently used by decorative painters to prepare walls and surfaces for glazing, tromp l’oeil and lacquer like monochromatic finishes. (NOTE: It is much more durable then Gesso.) Swedish Putty is especially useful in transforming old kitchen cabinets into new ones when coated with Hollandlac Brilliant Gloss or Satin Enamel.
Swedish Putty may be used to perfect walls and ceilings or smaller “high focus” projects such as a front door. It is a material which can yield spectacular results even for first time users.
Swedish Putty is available in two colors: natural off-white and khaki. Most professionals prefer to work with off-white on woodwork and khaki on walls and ceilings.
WHEN USED TO PERFECT A SUBSTRATE PRIOR TO THE USE OF HIGH GLOSS FINISHES, SWEDISH PUTTY SHOULD NOT BE RE-PRIMED AS DOING SO WILL REINTRODUCE TEXTURE TO THE SUBSTRATE AND RESULT IN A LESS “MIRROR LIKE” FINISH.
Surfaces to be treated should be dry and free of dust, chalk, grease and foreign material which would affect adhesion or primer-coating.
Dust and chalk must be removed by use of a tack cloth. Grease and wax should be removed with an appropriate stripper or with a solvent based cleaning solution.
The “working time” of this product may be extended by thinning with boiled linseed oil.
Tools: Use a broad, stainless steel spackle knife and plasterer’s “hawk” on a flat surfaces.
Use a sponge dipped in linseed oil on moldings and curved surfaces (apply like a heavy coat of polish).
New unpainted surfaces or previously painted surfaces: After surface preparation (sanding, etc.) and cleaning, apply one coat of FPE Oil or ECO primer and allow to dry overnight. Do not sand this primer prior to the application of Swedish Putty. DO NOT RE-PRIME. Apply a thin coat of Swedish Putty utilizing a clean, flexible “knife”. Use hand in rubber glove or sponge to apply this material to curved surfaces. Swedish Putty should be allowed to dry thoroughly (12-24 hours) before sanding to a glass-smooth finish.
Repeat process with one or more coats depending upon condition of surface and degree of perfection desired. Sand wet or dry with 220 or finer paper. After using Swedish Putty, the surface is prepared for final painting. Do not re-prime. Apply paint in thin coats as substrate is now less absorbent.
Keep can tightly sealed; cover unused portion with linseed oil.
