Benjamin Moore Paint Stores in Brooklyn & the Bronx!
18-volt 3.1 Ah Lithium Ion battery
Ergonomic design for perfect sanding balance
Integrated fuel gauge to monitor battery level
Charges on TCL 6 charger (6 amp charger)
Plug-It cord designed to integrate with Festool system
x
Ergonomic and balanced power adapter snaps into the ETSC, DTSC, and RTSC sanders to provide uninterrupted power from AC power sources (110V AC) using a Plug-It cable. Provides a power source alternative for continuous sanding performance. Compatible with 18 AWG Plug-It cords (included) standard to Festool Plug-It equipped sanders.
Removable wrap-around protection to protect the pad as well as the adjacent surfaces from inadvertent pad contact. Great for up-close sanding.
Re-usable capture bag comprised of extra-durable nonwoven polyester for extra-long life. These bags are meant to capture sanding dust, be emptied, and then re-used many times.
Standard soft replacement pad for consistent sanding results, especially on flat surfaces and narrow workpieces, with your RTS400 or RS 400 sander. The secret to a great finish lies in the use of the right pad and abrasive for the application at hand. With the Festool System, you’ll find a solution for virtually any application, and you’ll produce better results with pads, abrasives, sanders and dust extractors designed to work seamlessly and efficiently together. Festool sanding pads are designed as carefully as every other component for optimum performance and a long life. All of our pads are designed with dust extraction as a primary consideration, so you’ll work cleaner, produce a better finish and significantly extend the life of your abrasives and pads. Festool pads feature the StickFix hook and loop design for quick and efficient abrasive changes, and enable re-use of partially used abrasives. A highly-resilient, heat-resistant MPE foam is utilized in all our pads for consistent finishing results, uniform wearing, and extended pad life. Because sanding pads will eventually fatigue and require replacement, it is advisable to keep a fresh pad at hand to avoid a break in work. Includes 1 sanding pad.
Ergonomic, lightweight design for perfect handling with Festool cordless sanders; Bluetooth® enables the CLEANTEC mobile dust extractor to be started automatically when the cordless tool is switched on (use of a Bluetooth®-compatible mobile dust extractor is required); not compatible with all other Festool cordless tools. Compatible with RTSC 400, DTSC 400, and ETSC 125 cordless sanders.
Disposable paper dust bag for Turbo Dust Extraction when active dust extraction is not available. For use with DTS 400, RTS 400, and ETS 125 sanders.
Replacement pad for sanding flat surfaces.
90° Sanding pad for sanding inside corners.
For sanding outside edges.
For sanding curves.
For sanding V-grooves with inside radius of 25/64″ (10 mm).
For sanding inside radius of 1″ (25 mm).
For creating your own sanding pad to match custom profiles.
Uses the linear motiion of the LS 130 EQ sander to quickly strip small areas of carpet, wallpaper, glue, and other difficult to remove materials.
For sanding inside corners with a radius of 25/64″ (10 mm).
Foam interface pad for sanding delicate surfaces such as profiles and contours with your RTS400 or RS400 sander. The secret to a great finish lies in the use of the right pad and abrasive for the application at hand. With the Festool System, you’ll find a solution for virtually any application, and you’ll produce better results with pads, abrasives, sanders and dust extractors designed to work seamlessly and efficiently together. Festool sanding pads are designed as carefully as every other component for optimum performance and a long life. All of our pads are designed with dust extraction as a primary consideration, so you’ll work cleaner, produce a better finish and significantly extend the life of your abrasives and pads. Festool pads feature the StickFix hook and loop design for quick and efficient abrasive changes, and enable re-use of partially used abrasives. A highly-resilient, heat-resistant MPE foam is utilized in all our pads for consistent finishing results, uniform wearing, and extended pad life. Because sanding pads will eventually fatigue and require replacement, it is advisable to keep a fresh pad at hand to avoid a break in work. Includes 1 sanding pad.
