Guide-Rails

Functions

Designed as key system components to the Festool MFT and Guide Rail systems, Festool Screw Clamps secure your workpiece for precision cutting, sanding, routing, sanding, or just about any other application. Designed to work seamlessly with holes and channels on the the Festool MFT Multifunction table and can be inserted into bottom t-slot of Festool FS Guide Rails for limitless positioning.

• Clamping thickness 11 13/16 inches (300mm).
• Traditional screw clamp design with specialized head made to fit the holes and channels of the MFT and Guide Rail systems.
• Secure your workpiece for precision cutting, sanding, routing, sanding, or just about any other application.
• Designed for all clamping applications across the Festool System
• Solid steel version

x

Functions

Replacement non-slip adhesive strips for FS Guide Rails. Helps deliver consistent, accurate cutting results, especially on smooth materials such as sheet goods, without the need for clamps. Includes one 32.8ft (10m) roll.

• Helps deliver consistent, accurate cutting results, especially on smooth materials such as sheet goods, without the need for clamps
• Includes one 32.8ft (10m) roll
• Replacement adhesive strips for guide rails, in 33 ft (10 m) rolls

x

Functions

Quickly and accurately set angles for cutting or routing with the Festool FS guide rails. Ideal for making angled, mitered, or even compound cuts in sheet goods. Guide rail sold separately.

• Made of aluminum and steel for long life.
• Plastic guides fit easily into the outside guide rail track
• For angle cuts on guide rail between 0 and 180°

x

Functions

Gecko is equipped with dual quick-release suction cups that form a tight and secure seal with non-porous material. With an easy to grip handle, use the Gecko to lift and carry non-porous materials and sheet goods up to 110 pounds. Combine the Gecko Suction Handle with the Gecko Guide Rail Adapter to secure your Festool guide rail to any non-porous flat surface for secure and precise cutting or routing. Includes one Gecko Suction Handle

• Lift and carry non-porous materials and sheet goods up to 110 pounds
• Dual quick-release suction cups form a tight seal with your material, for secure handling and transport
• Combine with the Gecko Guide Rail Adapter to secure your Festool guide rail to any non-porous flat surface for secure and precise cutting or routing
• Includes one Gecko Suction Handle
• For carrying components or to fix the guide rail
• For planer surfaces

x

Functions

Festool FS Guide Rails are available in eight different lengths from 32 inches to 197 inches (800 – 5000 mm), providing the right length for straight, splinterfree cutting in just about any application. The integrated splinterguard is a critical guide rail system component, and after some time and heavy use, will need to be replaced. Replace your splinterguard as needed to ensure perfect alignment of your guide rail to the cut line, and to protect against tear out, on cuts both with the grain and across. Though you should expect many cuts from your original splinterguard, its life expectancy is heavily dependent on your application. Keep your cuts perfectly splinterfree by periodically replacing your splinterguard, especially if you are switching between blades, or using the guide rail with more than one saw. Clear splinterguard enhances visibility of cut line. Includes one 55in (1400mm) Clear Splinterguard.

• Clear splinterguard enhances visibility of cut line
• A fresh splinterguard can be matched perfectly to the saw blade, providing precise alignment to your cut line, saving valuable set up time
• A fresh splinterguard is the best protection against tear out, for cuts both with the grain and across
• Change your splinterguard if you are switching between different kerfed blades or different saws, ensuring a precise match
• Replacement splinterguard for guide rails
• Transparent

x

Functions

The Parallel Guides greatly enhances the capability of the Festool Guide Rail System by providing a faster, easier, smarter way to create consistent rip cuts. The Parallel Guides are the two longer sections and offer consistent rip cuts using two adjustable stops that engage the edge of the material parallel to the cut line. They are adjustable up to 650mm ( 25 19/32 in). The Parallel Guide can be used with any length Festool FS/2 guide rail. Includes Parallel Guides only. Parallel Guide Extensions and Guide Rail sold separately.

• Greatly enhances the Guide Rail System by providing a faster, easier, smarter way to make consistent rip cuts
• Attaches easily and clamps quickly to the guide rail, ensuring secure and consistent cuts
• Easy to read scale for cuts up to 650mm ( 25 19/32 in)
• Easily calibrated against the guide rail splinterguard for precise, splinterfree and consistent ripping
• For sawing along the width
• For fixed cuts, can be re-set using the scale and end stop
• Mounting on the guide rail without the use of tools

Includes

• Stop ruler with additional clamp
• Adjustable stop
• Qty. in pack: 2.00 Units
• In self-service display pack

x

Functions

Connect any number of guide rails for accurate, limitless cutting with Festool Guide Rail Connectors. Connectors fit in integrated guide rail T-slots for secure cutting. Includes 1 connector (2 are needed). Can also be used to connect the Festool MFS templates.

• Connect a limitless number of guide rails for long cuts with Festool Guide Rail Connectors
• Steel bars with 4 set screws secure connectors, ensuring straight cuts
• Set screws are slotted to prevent over-tightening the rail
• Can also be used to connect Festool MFS templates
• To connect guide rails for long workpieces
• Qty. in pack: 1

x

Functions

Work more efficiently by preventing your suction hose and cords from getting snagged on the end of your guide rail by attaching the Hose and Cord Deflector. Quickly and easily attaches to the end of the guide rail without the need for tools. Features wings on the outside edges to help keep the hose and cord properly positioned and out of your way. Made of nylon reinforced plastic for a long service life. Includes 1 Hose and Cord Deflector.

• Work more efficiently by preventing your suction hose and cords from getting snagged on the end of your guide rail
• Quickly and easily attaches to the end of the guide rail without the need for tools.
• Features wings on the outside edges to help keep the hose and cord properly positioned and out of your way
• Made of nylon reinforced plastic for a long service life.
• Prevents suction hoses and cables from catching on the end of the guide rail

x

Functions

Designed for rapid positioning and clamping of Festool FS Guide Rails – includes fixed jaw and clamping jaw. The FS-Rapid Clamp is particularly useful for fast and reliable clamping of guide rails to sheet good materials. Mounts to guide rails using the continuous bottom t-slot for limitless adjustability. One-handed trigger action enables quick set up on material edge. Fits all Festool guide rails. Includes 1 clamp.

• Designed for rapid positioning and clamping of Festool FS Guide Rails to all types of sheet good material
• Mounts to guide rails using the continuous bottom t-slot for limitless adjustability
• One-handed trigger action enables quick set up on material edge.
• For clamping and positioning guide rails FS, FS/2 and GRP/2

Includes

• Clamping jaws
• Fixed jaws
• In self-service display pack

x

Functions

Maximize the versatility of your Festool Router and Guide Rail System! Use the Guide Stop to adapt the Festool OF 1400 Router for use with the FS Guide Rail System for perfectly guided, straight routing. The OF 1400 Guide Stop features fine-adjustment controls, allowing you to precisely adjust the distance to cut in increments of 1/10mm. Also included with the Guide Stop is a support foot to levels the router to the surface of the guide rail, ensuring smooth, accurate results and increased stability. The Guide Stop attaches quickly and easily using two rods included in the scope of delivery of the OF 1400 router, and two knobs that double as handles for guiding the router along the guide rail.

• Adapt the Festool OF 1400 Router for use with the FS Guide Rail system for perfectly guided, straight routing
• Features fine-adjustment controls, allowing you to precisely adjust the distance to cut in increments of 1/10mm
• Includes support foot to level the router with the surface of the guide rail, ensuring smooth, accurate results and increased stability
• Attaches quickly and easily using two rods included in the scope of delivery of the OF 1400 router
• With fine adjustment and support for router without guide rods
• Without rods

x

Functions

The Parallel Guide System greatly enhances the capability of the Festool Guide Rail System by providing a faster, easier, smarter way to create consistent rip cuts. The Parallel Guide Extensions connect to the Parallel Guide (495717), enabling narrow rip cuts from 1mm to 195mm (1/16 in to 7-11/16 in). The Parallel Guide Extensions must be used in conjunction with the Parallel Guide. The best value is purchasing these two components as a set (P00108). Parallel Guide and Guide Rail sold separately.

• Greatly enhances the Guide Rail System by providing a faster, easier, smarter way to make consistent rip cuts
• Make narrow repeititive cuts on the near, or short side of the material
• Easy to read scale for cuts up to 195mm (7 11/16 in)
• Easily calibrated against the guide rail splinterguard for precise, splinterfree and consistent ripping
• Only for use with the FS-PA

Includes

• Stop ruler
• Bridge
• Scale
• Qty. in pack: 2.00 Units
• In self-service display pack

x

Functions

Attach your Festool jigsaw to any length Festool guide rail for straight, repeatable cuts. The PS300 and PSB300 jigsaws simply clip into this base for smooth and straight cutting with any Festool guide rail.

• Connect your Festool PS 300 or PSB 300 to the any Festool guide rail for smooth, straight cutting
• Toolless attachment to jigsaws and to rail eliminate setup time
• Allows use of jigsaws with FS and FS/2 guide systems

x

Functions

Protect your investment in Festool Guide Rails with the durable nylon Carrying Case for Festool Guide Rails. For convenient and protected transport or storage of up to two FS 1400/2 or shorter guide rails. Durable nylon construction protects your guide rails from scratches and dings. Guide rails sold separately.

• Durable nylon construction protects your guide rails from scratches and dings during transport or storage
• For convenient and protected transport or storage of up to two FS 1400/2 or shorter guide rails.
• Carrying bag with shoulder straps
• Up to length of FS 1400/2

x

Functions

The perfect complement to the Festool MFT or Guide rail system, the Festool Quick Clamp secures your workpiece for precision cutting, sanding, routing, sanding, or just about any other application. Ratcheting mechanism enables easy locking and quick release for a secure grip on your material. Designed to work seamlessly with holes and channels on the the Festool MFT Multifunction Table and can be inserted into bottom t-slot of Festool FS Guide Rails for limitless positioning. Clamping thickness 6 5/8 inches (168mm). Includes 1 clamp.

• Secures your workpiece for precision cutting, sanding, routing, sanding, or just about any other application.
• Ratcheting mechanism enables easy locking and quick release for a a more efficient workflow
• Works seamlessly with holes and channels of the the MFT table and can be inserted into bottom t-slot of guide rails for limitless positioning.
• Solid steel version

x

Functions

Affixing to the rib, or guide on top of the Festool FS Guide Rail, the Limit Stop can be used to provide secure stop points for repetitive cutting and for routing with most Festool routers. With a seamless fit to the rear of the TS plunge cut saw’s sole plate, the Limit Stop also helps reduce the risk of kickbacks for plunge cut starts. Though Festool TS saws are packaged with a single Limit Stop a second stop is useful for pairing as a stop or start point. Includes one Limit Stop.

• Provides a secure, positive stop for starting or ending a cut
• Fits seamlessly to the back of the TS plunge cut saw’s sole plate, helping reduce the risk of kickbacks for plunge cut starts
• Fits quickly and securely to the top of the FS Guide Rail for both cutting and routing applications
• Can also be used as guide stop
• Used as a rear and front stop position on guide rail FS/2

x

Functions

Replacement PTE plastic Glide Strip for FS Guide Rails. Allows your TS saw to glide smoothly and consistently over the guide rail. The Glide Strip provides a slightly elevated, ultra low-friction surface for the saw to ride on, eliminating friction from contact with the guide rail, as well as the slowing effects of dust, for smoother, more consistent sawing action. Includes one 32.8ft (10 m) roll.

• Replacement PTE plastic Glide Strip for FS guide rails
• Allows your TS saw to glide smoothly and consistently over the guide rail
• 33 ft (10 m)
• Replacement sliding surface for guide rail

x

Functions

Secure your Festool guide rail to almost any non-porous flat surface for secure and precise cutting using the Gecko Suction Clamping Set. Gecko is equipped with dual quick-release suction cups that form a tight seal with your material, so your attached guide rail won’t budge during cutting or routing operations. With an easy to grip handle, use the Gecko to lift and carry non-porous materials and sheet goods up to 110 pounds. Includes Gecko handle and guide rail adapter (guide rail sold separately)

• Dual quick-release suction cups form a tight seal with your material, so your attached guide rail won’t budge during cutting or routing applications
• Lift and carry non-porous materials and sheet goods up to 110 pounds
• Includes Gecko handle and guide rail adapter (guide rail sold separately)
• For carrying components or to fix the guide rail
• For planer surfaces

Includes

• Gecko Guide Rail Adapter
• Gecko Suction Handle
• In self-service display pack

x

Functions

Splinterguard (replacement), Adhesive-backed Splinterguard to maintain splinter-free cut quality. Splinterguard material is semi-transparent for better visibility of the cut line and is quick and easy to replace.

• Replacement splinterguard for guide rails
• Transparent

x

Functions

Designed as key system components to the Festool MFT and Guide Rail systems, Festool Screw Clamps secure your workpiece for precision cutting, sanding, routing, sanding, or just about any other application. Designed to work seamlessly with holes and channels on the Festool MFT Multifunction Table and can be inserted into bottom t-slot of Festool FS Guide Rails for limitless positioning.

• Clamping thickness 4 11/16 inches (120 mm).
• Traditional screw clamp design with specialized head made to fit the holes and channels of the MFT and Guide Rail systems.
• Secure your workpiece for precision cutting, sanding, routing, sanding, or just about any other application.
• Designed for all clamping applications across the Festool System
• Solid steel version

x

Functions

Replacement Guide Stop for use with the OF 1010 Router and FS Guide Rail System. Maximize the versatility of your Festool Router and Guide Rail System! Use the Guide Stop to adapt the Festool OF 1010 Router for use with the FS Guide Rail System for perfectly guided, straight routing. The Guide Stop attaches quickly and easily using two rods included in the scope of delivery of the OF 1010 router.

• Adapt the Festool OF 1010 Router for use with the FS Guide Rail System for perfectly guided, straight routing
• Maximize System versatility by using the same Guide Rail System for your TS Saw, Jigsaw and Router!
• Delivers the flexibility to start and end cuts anywhere in the material
• Work precisely to avoid waste of material and rework
• Complete with support
• For use of routers OF 900, OF 1000, OF 1010 with the FS guidance system
• Without rods

x