The DOMINO Trim Stop enables precise and repeatable mortise placement in ends of narrow workpieces, such as rails or spindles. Designed for material between 7/8 inch and 2-3/4 inch (22 mm and 70 mm) in width. Sides adjust independently for centered or off-center mortising. Attaches quickly and easily to the Festool DOMINO Joiner without the need for tools.
x
DOMINO Hand Rail Fence for securely joining round workpieces such as handrails. For centering on round stock 1 3/8 to 2 3/8 inches (35mm to 60mm) in diameter. Attaches quickly and easily to the DOMINO Joiner without the need for tools.
Replacement part for DOMINO Joiners. The Base Support Bracket now includes integrated index stops, providing accurate reference points for mortising near the edge of a workpiece. This is particularly useful for narrow workpieces. When using the flip stops, the center of the cut is 20mm (25/32″) from the edge versus 37mm (1-15/32″) without. The flip stops offer optimal flexibility when using the new 4mm DOMINO cutter and tenons.
For repeat hole spacing between 3-7/8″ and 8-1/16″ (100mm and 205mm). The DOMINO Cross Stop enables precise and repeatable mortise placement across the surface or edge of a work piece. Designed for material of any length, the Cross Stop increases efficiency by eliminating the need for witness or scribe marks. Adjustable-spaced pins register against the starting edge of the material or in the previous mortise for accurate and consistent spacing of mortises. Attaches quickly and easily without tools to the Festool DOMINO Joiner. Replaces product 493488.
The DOMINO SYSTAINER 2 is an excellent complement to the DOMINO System, particularly for users who wish to create their own customized assortments. With dividers and labels for storing, organizing, and transporting a variety of DOMINO tenons. Integrates with Festool SYSTAINER System to provide secure, organized and portable storage solution for your DOMINO tenons. Includes SYSTAINER 2. Tenons and cutters sold separately. Contains three removable plastic bins with dividers.
The new DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble your work for increased flexibility across a wide range of applications – from corner panel joints to center panel joints to joints between a series of holes. For increased stability, speed, and flexibility.
5mm DOMINO Cutter for use with 5mm DOMINO tenons.
6mm DOMINO Cutter for use with 5mm DOMINO tenons.
8mm DOMINO Cutter for use with 5mm DOMINO tenons.
10mm DOMINO Cutter for use with 5mm DOMINO tenons.
4mm DOMINO Cutter for use with 5mm DOMINO tenons.
32 Anchor Bolts SV-AB D14, 16 Connector Double Bolts SV-DB D14, 128 Half-Shells for the Anchor Bolts and Connector Double Bolts, 32 Expansion Anchors SV-SA D14, 64 transverse anchors SV-QA D14 including studs, hex wrench 4 mm for tightening screws, 64 Half-Shells SV-V D14 for widening 32 cross anchors, 32 cover caps each in silver, dark brown and light brown (SV-AK D14 slr, SV-AK D14 brn1 and SV-AK D14 brn2), 32 DOMINO Tenons D14x75 beech.
Break through the limits of shop-built pieces and on-site construction with the use of knock-down hardware. Create, build, and finish full-sized constructed pieces, then quickly disassemble, move, and then reassemble with only a hex wrench.
DOMINO fasteners work with the DOMINO XL (DF 700) Joiner to create flat or corner joints. Corner and flat connectors provide simple and quick connections without the need for templates or complex measuring. Colored cover caps provide high-quality corner connection appearance. Available as a set and individual components. Requires 14mm cutter.
32 Expansion Anchors for permanent placement.
32 Cross Anchors including screws for locking Anchors or Double Bolts
16 double-headed bolts for flat connections, including 64 Half-Shells. The double-headed bolts can be clipped using 2 Half-Shells or (as shown) with 4 Half-Shells – depending on the required alignment
64 Half-Shells for widening 32 Cross Anchors. For widening and pressure distribution when using Cross Anchors (201351) in materials such as particleboard and MDF.
Cosmetic plastic cover cap for exposed mortise holes.
32 Anchor Bolts SV-AB D14, 32 Connector Cross Anchors SV-QA D14, 32 Expansion Anchors SV-SA D14
16 Double Bolts SV-DB D14, 32 Cross Anchors SV-QA D14, 64 Half-Shells SV-V D14 for widening. Used for corner connection applications.
8mm cutter for the DOMINO XL DF 700 Joiner for use with 8mm tenons. Durable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect fit and precise joint placement.
10mm cutter for the DOMINO XL DF 700 Joiner for use with 10mm tenons. Durable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect fit and precise joint placement.
12mm cutter for the DOMINO XL DF 700 Joiner for use with 12mm tenons. Durable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect fit and precise joint placement.
14mm cutter for the DOMINO XL DF 700 Joiner for use with 14mm tenons. Durable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect fit and precise joint placement.
