Eurolux flows easily and spreads quickly, but do not overwork with brush or roller. Do not apply at temperatures below 40˚F or above 80˚F, or when relative humidity exceeds 80%. Surfaces must be dry, clean and free from grease. New wood should be primed with ECO Primer/Undercoat. Walls and ceilings should be primed with Eurolux Primer before receiving EUROLUX Satin topcoats. EUROLUX Satin is normally rolled or brushed in a two-coat application. For both aesthetic and financial reasons, we recommend that you roll this finish as far as it will go before going back to the pan to reload your roller.
New walls and woodwork: Clean and sand. If required, fill holes and cracks. Apply one coat appropriate primer. Finish with two coats of EUROLUX Satin. For optimal appearance, pole-sand Primer and first coat of EUROLUX glass-smooth with 220 paper and remove all dust before applying final coat.
Previously painted walls and woodwork: Clean and sand. Remove all loose and flaking material. Spot prime exposed substrate with EUROLUX Primer/Undercoat or reprime entire surface. Finish with two coats of EUROLUX Satin. For optimal appearance, pole-sand Primer and first coat of EUROLUX glass-smooth with 220 paper and remove all dust before applying final coat.
Metal and plastic surfaces: Prepare with the appropriate FPE Primer. Refer to primers in directory.
