Routers

Functions

Use the new LR 32 Guide Rail Connector to precisely align multiple LR 32 style rails for precision hole drilling in larger workpieces*. With longer rail options, you can accurately place shelf pins holes and European hardware based on the 32 mm system on taller case goods and cabinets.With the new LR 32 Guide Rail Connector, it is possible to drill closer to the end of the rail, maximizing the value of existing single guide rail setups.

This product is used to produce accurate spacing when joining two LR 32 guide rails. The guide rail connectors (482107) are required and must be purchased separately.

• Positions the first hole on the hole series guide rail at a distance of 9.5, 16 or 32 mm from the workpiece edge

x

Functions

Used with edging plate to deflect chips into dust extraction hood.

• Improves dust extraction
• Save on clean up time
• Use OF 1010 router instead of dedicated trim router
• Accuracy avoids waste of material

x

Functions

When attached to the Festool OF 1010 Router, the Edge Guide allows you to rout perfectly parallel to the material edge, delivering precise dados, rabbets, flutes, grooves and ploughs. Attaches quickly and easily to the router using integrated thumbscrews and two steel rods included with the OF 1010. Optional chip guard enables ultra-efficient dust extraction, saving valuable cleanup time. Chip Guard (437307) sold separately.

• Edge Guide delivers precision routing guidance for dados, rabbets, flutes, grooves and ploughs
• Attaches quickly and easily using integrated thumbscrews and two steel rods included with the OF 1010
• Work precisely to avoid waste of material and rework
• With 2 guide rods

x

Functions

Includes shaft and 3 scanning rollers. Attaches to angle arm to copy workpieces and patterns. Scanning roller follows contours and guides cutter.

• Expand functionality of OF 1010 router
• Save time by copying workpieces and patterns
• Fine adjustment and guidance enable precise copy of workpieces and patterns
• Accuracy avoids waste of material
• Copier scanning set KT-OF and angle arm WA-OF are needed to copy workpieces

x

Functions

Works with 1/4″ and 8 mm collets.

• For shank support dia. 1/4“ (6.35 mm) and 5/16″ (8 mm) for centering the copying rings

x

Functions

Copying ring, KR-D13.8mm (.543″), dia 11mm (.433″), OF1010

x

Functions

• For sideway extraction

x

Functions

With two adjustable fences and integrated rule for routing grooves and slots on edges.

• Expand functionality of OF 1010, OF 1400, and OF 2200 routers
• Integrated ruler and adjustable fences allow for precise routing of grooves and slots
• Accuracy avoids waste of material
• Integrated dust port improves dust extraction
• Safe guidance of the router thanks to the movable legs

x

Functions

Used with copier scanning set to copy workpieces. Used with edging plate for trimming edges flush. Copier set and edging plate sold separately.

• Expand functionality of OF 1010 and OF 1400 routers
• Use OF 1010 or OF 1400 routers instead of dedicated trim router in conjunction with edging plate
• Fine adjustment and guidance allow precise copying with copier set or flush cutting with edging plate
• Accuracy avoids waste of material
• Needed to copy workpieces in conjunction with the copier scanning set KT-OF

x

Functions

Extension table – extends support area for edge trimming. Small center bore eases edge and corner routing. Outrigger handle for additional support.

• To increase the bearing surface when working on edges
• Delivered without guide rods

x

Functions

Festool FS Guide rails are available in eight different lengths from 32 inches to 197 inches (800 – 5000 mm), providing the right rail for every application. The integrated splinterguard aligns perfectly to your cut line, saving set up time and serving as protection against tear out, on cuts both with the grain and across. Guide rails can be easily connected using the accessory guide rail connectors for a rigid, secure and continuous connection. Guide rails make work easier by taking the tool to the work, and save time and money by eliminating laborious measurements, rework and wasted material. Connect rails using Festool Guide Rail Connectors to make limitless cuts.

• Use the FS 1400 Guide Rail (55 inches) with the Festool TS Plunge cut saw to make precision cuts up to 49 inches long
• Integrated splinterguard serves as cut line and prevents tear-out and splintering
• A fully integrated system, use your Festool routers or jigsaw with the guide rail for expanded capability
• Non-skid, dual-clamping rubber strips prevent movement during the cutting operation, saving significant set up time

x

Functions

The FS FS 2424/2-LR 32 Guide Rail (95 inches) was designed specifically for use with Festool Routers and the LR 32 Hole Drilling System to construct cabinets using the European frameless 32mm system for shelf pins and hardware. Also, use the LR 32 System for line boring, or setting shelf pins in panels up to any length. Festool FS Guide rails are available in eight different lengths from 32 inches to 197 inches (800 – 5000 mm), providing the right rail for every application. For cutting applications, the integrated splinterguard aligns perfectly to your cut line, saving set up time and serving as protection against tear out, on cuts both with the grain and across. Guide rails can be easily connected using the accessory guide rail connectors for a rigid, secure and continuous connection. Guide rails make work easier by taking the tool to the work, and save time and money by eliminating laborious measurements, rework and wasted material. Use the FS 2424/2-LR 32 Guide Rail (95 inches) with the Festool Plunge cut saw to cut material up to 89 inches. Connect rails using Festool Guide Rail Connectors to make limitless cuts.

• Combine this guide rail with the Festool LR 32 Hole Drilling System to efficiently build European style 32mm cabinets
• Quickly and easily align and machine holes for shelf pins and 35 millimeter cup hinges
• A fully integrated system, use your Festool routers, plunge saws, or jigsaws with the guide rail for expanded capability
• Guide strip reduces friction between the tool and guide rail for easier, more fluid cutting action

x

Functions

Copying ring, KR-D10.8mm (.425″), dia 9mm (.354″), OF1010

x

Functions

Festool FS Guide rails are available in eight different lengths from 32 inches to 197 inches (800 – 5000 mm), providing the right rail for every application. The integrated splinterguard aligns perfectly to your cut line, saving set up time and serving as protection against tear out, on cuts both with the grain and across. Guide rails can be easily connected using the accessory guide rail connectors for a rigid, secure and continuous connection. Guide rails make work easier by taking the tool to the work, and save time and money by eliminating laborious measurements, rework and wasted material. Connect rails using Festool Guide Rail Connectors to make limitless cuts.

• Use the FS 800 Guide Rail (32 inches) with the Festool TS Plunge cut saw to make precision cuts up to 26 inches long.
• Integrated splinterguard serves as cut line and prevents tear-out and splintering
• A fully integrated system, use your Festool routers or jigsaw with the guide rail for expanded capability
• Non-skid, dual-clamping rubber strips prevent movement during the cutting operation, saving significant set up time

x

Functions

With the LR 32 Hole Drilling System from Festool, you can precisely and efficiently build cabinets using the European frameless 32 mm system. Invaluable for placing cup hinges (35mm) or setting shelf pin holes (based on 32mm spacing) in casework, this portable line boring system allows you do in the field what has traditionally been a shop-only job, possible only with large stationary equipment. For use with the Festool OF 1010 and OF 1400 routers and guide rail system, the LR 32 System is supported by a 42in, 55in and a 95in rail (sold separately), to cover any size job. Includes: Guide plate, Centering mandrel, 2 edge stops, 2 linear stops, 2 clamps, Operating wrench, 35 mm carbide-tipped European hinge boring bit, 2 carbide-tipped 5 mm shelf pin bits (one for through holes and one for stopped pin holes).

• Precisely and efficiently build cabinets using the European frameless 32 mm system
• For placing cup hinges (35mm) or setting shelf pin holes in casework
• Portable line boring system allows you do in the field what has traditionally been a shop-only job
• For use with Festool OF 1010 router and guide rail system, the LR 32 System is supported by a 42in, 55in and a 95in rail (sold separately)
• For use with hole line guide rails

Includes

• Guide plate
• Centering mandrel
• Hinge location cutter HM dia. 1-3/8″ (35 mm)
• Dowel drill HW dia. 7/32″ (5 mm) V-shaped tip
• Dowel drill HM dia. 3/16″ (5 mm) with centring bit and pre-cutter
• 2 parallel side fences with adjustable stop
• Screw Clamp, 4-11/16″
• 2x longitudinal stop
• Screwdriver, WAF 5
• In SYSTAINER SYS 1 T-LOC

x

Functions

For parallel alignment of LR 32 guide rail. Includes stop and sliding stop flag.

Replacement edge stop, post and sliding stop flag

• With adjustable stop
• For parallel alignment of guide rails

x

Functions

Replacement Guide Stop for use with the OF 1010 Router and FS Guide Rail System. Maximize the versatility of your Festool Router and Guide Rail System! Use the Guide Stop to adapt the Festool OF 1010 Router for use with the FS Guide Rail System for perfectly guided, straight routing. The Guide Stop attaches quickly and easily using two rods included in the scope of delivery of the OF 1010 router.

• Adapt the Festool OF 1010 Router for use with the FS Guide Rail System for perfectly guided, straight routing
• Maximize System versatility by using the same Guide Rail System for your TS Saw, Jigsaw and Router!
• Delivers the flexibility to start and end cuts anywhere in the material
• Work precisely to avoid waste of material and rework
• Complete with support
• For use of routers OF 900, OF 1000, OF 1010 with the FS guidance system
• Without rods

x

Functions

Replacement sliding stop flag for edge stop used with LR 32 guide rail.

x

Functions

Orients router on its side for flush trimming operations.

• Expand functionality of OF 1010 and OF 1400 routers
• Use OF 1010 or OF 1400 routers instead of dedicated trim router
• Fine depth adjustment on angle arm and guidance enable precise flush trimming
• Accuracy avoids waste of material
• Angle arm WA-OF and edging plate UP-OF are needed for the flush trimming of projected edges

x

Functions

Quick and precise adjustment when using router with guide stop or edging plate.

• Allows for precise adjustment of guide stop or edging plate
• Save time not having to make adjustments to router
• Accuracy avoids waste of material
• Cuts with guide stop are perfectly straight

x

Functions

Includes Fine Adjustment for OF 1010 EQ Edge Guide.

• Allows for finer adjustments when using the Edge Guide router attachment
• For use with OF 1010 EQ Router
• For fast and dimensionally accurate adjustment on the parallel side fence
• Can be retrofitted
• Delivered without side stop and guide rods

x

Functions

Customize the solid base piece hole diameter with a plunge bit to meet your needs. Provides support across the entire surface of the router base. Ideal for working with smaller diameter bits especially for greater support on outside corners. Does not have the center bore.

• Customize base runner to your specific needs
• Allows for faster and easier corner routing
• Enables more precise corner routing
• Avoids risk of base opening catching on the corner
• Hard fibre base runner
• Centre hole 19/32″ (dia. 15 mm)

x

Functions

The Trammel Unit for the Festool OF 1010 Router allows you to rout precise circles and decorative curves from 6-1/32 inches up to 29-7/8 inches in diameter. Anchored in the center with the included trammel point, and attaches simply and securely to the router using thumbscrews.

• Cut perfect circles and curves
• Diameter of circle can range from 6-1/32 inches up to 29-7/8 inches
• Offers the flexibility to start and end cuts anywhere in the material
• Work precisely to avoid waste of material and rework
• For cutting radii, circles and decorative curves on surfaces and edges

x

Functions

Auxiliary dust extraction hood for VS 600.

• Improves dust extraction
• Save on clean up time
• Keep workspace clean
• Clear plastic hood and better dust extraction allow good sight of cut
• For jointing system VS 600 and for edge trimming

x

Functions

Clamping collet 1/4″, SZ-D6,35-OF1010

• Faster and easier bit changes with one wrench.
• Works on the OF1010
• With locking nut
• For cutter shank dia. 1/4″

x

Functions

Clamping collet 8 mm, SZ-D8/OF1010

• Faster and easier bit changes with one wrench.
• Works on the OF1010
• With locking nut
• For router shank dia. 5/16″

x

Functions

Copying ring, KR-D17mm (.669″), dia 15mm (.590″), OF1010

x

Functions

Copying ring, KR-D24mm (.944″), dia 21mm (.826″), OF1010

x

Functions

Copying ring, KR-D27mm (1.062″), dia 25mm (.984″), OF1010

x

Functions

Copying ring, KR-D30mm (1.181″), dia 27mm (1.062″), OF1010

x

Functions

40mm template guide, compatible with OF 1000 and OF 1010 routers. D=40mm, d=37mm

x

Functions

Guide plate, centering mandrel, linear stops and two edge stops for drilling.European 32 mm grid pattern holes in shelves and cabinets. Guide rail and bits sold separately.

• Compatible with Festool OF 1010 and 1400 plunge routers
• Centering Mandrel is included
• Guide Plate, Centering Mandrel, Linear Stops and 2 Edge Stops for parallel guidance
• Adjustable guides on plate can reduce the slop from plate to rail – adjust so there is little to no play.
• For use with hole line guide rails

Includes

• Guide plate
• Centering mandrel
• 2x edge guide
• 2x longitudinal stop
• In carton

x

Functions

Auxiliary dust extraction hood for VS 600.

• Improves dust extraction
• Save on clean up time
• Keep workspace clean
• Clear plastic hood and better dust extraction allow good sight of cut
• For sideway extraction

x

Functions

Maximize the versatility of your Festool Router and Guide Rail System! Use the Guide Stop to adapt the Festool OF 1400 Router for use with the FS Guide Rail System for perfectly guided, straight routing. The OF 1400 Guide Stop features fine-adjustment controls, allowing you to precisely adjust the distance to cut in increments of 1/10mm. Also included with the Guide Stop is a support foot to levels the router to the surface of the guide rail, ensuring smooth, accurate results and increased stability. The Guide Stop attaches quickly and easily using two rods included in the scope of delivery of the OF 1400 router, and two knobs that double as handles for guiding the router along the guide rail.

• Adapt the Festool OF 1400 Router for use with the FS Guide Rail system for perfectly guided, straight routing
• Features fine-adjustment controls, allowing you to precisely adjust the distance to cut in increments of 1/10mm
• Includes support foot to level the router with the surface of the guide rail, ensuring smooth, accurate results and increased stability
• Attaches quickly and easily using two rods included in the scope of delivery of the OF 1400 router
• With fine adjustment and support for router without guide rods
• Without rods

x

Functions

Replacement.

• Improves dust extraction while edge routing
• Save on clean up time
• Keep workspace clean
• Toolless attachment to or removal from router base
• For sideway extraction

x

Functions

Accessory base for use with small diameter edge-forming bits. Provides stability on outside corners by extending the base to the inside near the bit.

• Allows for faster and easier corner routing
• Enables more precise corner routing
• Avoids risk of base opening catching on the corner
• Additional support and stability, especially with small diameter bits
• Hard-fibre base runner with 3/4″ (20 mm) centre bore
• Reduces the opening of the router to the cutter diameter

x

Functions

Oversized, heavy-duty base plate with integrated dust hood.

• Expand functionality of OF 1400 router since larger hole diameter of table widener allows use of larger bits
• Greater base support avoids waste of material
• Allows precise edge routing without wobble
• Integrated rotating chip catcher improves dust extraction
• For sideway extraction
• Running pad with support extension
• Running pad with chip deflector

x

Functions

Copying ring, KR-D 40 mm (1.575″), OF 1400

• Festool OF 1400 copying rings 40mm OD / 37mm ID
• Tool Less quick change of template guides

x

Functions

Template Guide, 30 mm OD / 27 mm ID

• Festool OF 1400 copying rings 30mm OD / 27mm ID
• Tool Less quick change of template guides

x

Functions

Copying ring, KR-D 27mm (1.062″), OF 1400

• Tool Less quick change of template guides

x

Functions

Copying ring, KR-D 24 mm (.944″), OF 1400

• Copying ring, KR-D 24 mm (.944″), OF 1400
• Tool Less quick change of template guides

x

Functions

With flange for VS 600 Jointing System.

x

Functions

With flange for VS 600 Jointing System.

x

Functions

With flange for VS 600 Jointing System.

x

Functions

With flange for VS 600 Jointing System.

x

Functions

• Faster and easier bit changes with one wrench.
• Works on the Festool OF2200 and OF2000 (24mm Wrench)
• Dramatically reduces bit slipping
• Maintain center line and higher precission cuts over the life of the collet
• For router shank dia. 5/16″

x

Functions

• Faster and easier bit changes with one wrench.
• Works on the Festool OF2200 and OF2000 (24mm Wrench)
• Dramatically reduces bit slipping
• Maintain center line and higher precission cuts over the life of the collet
• For router shank dia. 1/4“

x

Functions

Collet w/nut 3/8in, OF1400/2200, replaces 492142

• Faster and easier bit changes with one wrench.
• Works on the Festool OF2200 and OF2000 (24mm Wrench)
• Dramatically reduces bit slipping
• Maintain center line and higher precission cuts over the life of the collet
• For router shaft dia. 3/8“

x

Functions

• Faster and easier bit changes with one wrench.
• Works on the Festool OF2200 and OF2000 (24mm Wrench)
• Dramatically reduces bit slipping
• Maintain center line and higher precission cuts over the life of the collet
• For router shank dia. 1/2“

x

Functions

When used with the Festool OF 1400 Router, the Parallel Edge Guide allows you to rout up against, or perfectly parallel to the material edge, delivering precise dados, flutes, grooves, ploughs, rabbets and profiles. Fine-adjustment control allows you to dial in the distance from the material edge in increments of 1/10mm for ultra-precise routing. Dust extraction hood enables ultra-efficient dust extraction, saving valuable cleanup time. The Edge Guide is constructed from durable cast aluminum, and includes fiber-reinforced plastic thumbscrews for easy adjustment and a long service life. Attaches quickly and easily using integrated thumbscrews and two steel rods included in the router’s scope of delivery.

• Rout up against, or perfectly parallel to the material edge, for precise dados, flutes, grooves, ploughs, rabbets and profiles
• Fine-adjustment control allows you to dial in the distance from the material edge in increments of 1/10mm for ultra-precise routing
• Dust extraction hood enables ultra-efficient dust extraction, saving valuable cleanup time
• Attaches quickly and easily using integrated thumbscrews and two steel rods included in the router’s scope of delivery
• With fine adjustment and extraction hood
• Without rods

x

Functions

• Magnetics for self centering and easy insertion
• Tool Less quick change of template guides
• Variety of metric and imperial template guides available for the OF 2200

x

Functions

Accepts industry standard two-piece threaded guide bushings.

• Use your exisitng guide bearings with this unique device
• Tool-less, quick and self centering template
• Adapter for imperial copying rings

x

Functions

• Magnetics for self centering and easy insertion
• Tool Less quick change of template guides
• Variety of metric and imperial template guides available for the OF 2200

x

Functions

Allows you to make cut outs over large areas by allowing the router to ride on the carriage. 23-1/2″ (600mm) traverse width.

x

Functions

Accessory base with dust channels for use with template guides.

• Improves dust extraction
• Save on clean up time
• Allows for more precise routing, especially on corners
• Avoids risk of base opening catching on the corner
• For copying rings < 1-3/16" (30 mm)
• With openings for optimised extraction

x

Functions

• Magnetics for self centering and easy insertion
• Tool Less quick change of template guides
• Variety of metric and imperial template guides available for the OF 2200

x

Functions

Accessory base for use with small diameter edge-forming bits.

• Allows for faster and easier corner routing
• Enables more precise corner routing
• Avoids risk of base opening catching on the corner
• Increases stability during corner routing
• Reduces the opening of the router to the cutter diameter

x

Functions

• Magnetics for self centering and easy insertion
• Tool Less quick change of template guides
• Variety of metric and imperial template guides available for the OF 2200

x

Functions

When used with the Festool OF 2200 Router, the Edge Guide allows you to rout up against, or perfectly parallel to the material edge, delivering precise dados, flutes, grooves, ploughs, rabbets and profiles. Fine-adjustment control allows you to dial in the distance from the edge in increments of 1/10mm for ultra-precise routing. The Edge Guide is constructed from durable cast aluminum, and includes fiber-reinforced plastic thumbscrews for easy adjustment and a long service life. Attaches quickly and easily using integrated thumbscrews and two steel rods included in the router’s scope of delivery.

• Rout up against, or perfectly parallel to the material edge, delivering precise dados, flutes, grooves, ploughs, rabbets and profiles
• Constructed from durable cast aluminum, and includes fiber-reinforced plastic thumbscrews for easy adjustment and a long service life
• Attaches quickly and easily using integrated thumbscrews and two steel rods included in the router’s scope of delivery
• With fine adjustment and extraction hood
• Without guide rods ST-OF 2200/2

x

Functions

• Magnetics for self centering and easy insertion
• Tool Less quick change of template guides
• Variety of metric and imperial template guides available for the OF 2200

x

Functions

• Magnetics for self centering and easy insertion
• Tool Less quick change of template guides
• Variety of metric and imperial template guides available for the OF 2200

x

Functions

Includes guide stop and accessory base plate with offset for use with OF 2200 and FS guide rails.

• Expand functionality of OF 2200 router
• Guided cuts are perfectly straight
• Allows to start and end the cut anywhere in the material
• Accuracy avoids waste of material
• Without guide rods ST-OF 2200/2
• With fine adjustment and support plate for router

x

Functions

Use Guide Rods to attach Parallel Edge Guide or Guide Stop to the OF 2200 Router. Set of 2.

• Guided cuts are perfectly straight
• Utilize same rods for guide stop and edge guide
• Work precisely to avoid waste of material and rework
• Made in Germany
• Guide rods for side and guide stops 2 pieces

x

Functions

Oversized, heavy-duty base plate with integrated dust hood.

• Expand functionality of OF 2200 router since larger hole diameter of table widener allows use of larger bits
• Allows precise edge routing without wobble
• Greater base support avoids waste of material
• Increases safety during edge routing
• Support widener for safe guidance of the router at workpiece edges

x

Functions

Includes parallel edge guide, guide stop, guide rods, table widener base, small bore base, template guide base, offset base for guide rail, & metric template guide bushings.

Includes

• Guide rail adapter
• Parallel edge guide
• Guide rods
• Copying ring dia. 21/32″ (17 mm)
• Base runner D36
• Base runner for copying rings
• Extension
• In SYSTAINER SYS 3 T-LOC

x