Products on this page are for professional use only.
Alkyd Fabrication Primer is formulated for use in mild-to-moderate exposures. Its excellent wetting properties allow application to marginally prepared surfaces. Formulated to inhibit corrosion, this primer provides years of protection when applied properly. It can be top coated with most finishes that do not contain strong solvents.
x
Alkyd Shop Coat Primer is a quick-drying formulation that can withstand mild-to-moderate atmospheric conditions. It provides a protective barrier and can be top coated with a variety of finishes, including hot solvent topcoats. It can also be used as a temporary coat for transporting fabricated pieces, which can then be blasted and recoated at the job site. In interior non-corrosive environments, Alkyd Shop Coat Primer can be left uncoated.
Prep All Universal Metal Primer is an economical, single-component primer engineered to provide corrosion protection on all ferrous metals. This quick-drying formula provides fast production times, and its alkyd resin formulation allows for application of a wide variety of intermediate and finish coat products. Formulated for air spraying, it can also be applied by airless and HVLP sprayers, brushes, or rollers.
Shop Primer is an economical steel primer for commercial use in mild to moderate exposures. This product is ideal as a temporary transport coat on fabricated pieces or as an economical barrier primer. It is a temporary coating. This primer may be top-coated with a wide variety of finishes. However, finishes containing strong solvents (Ketones, Xylene, Toluene) may cause wrinkling or lifting of Shop Primer.
Universal Metal Primer is a high-performance, one-component, quick-dry, rust-inhibitive metal primer, formulated for use on ferrous metal substrates. The phenolic alkyd resin formulation allows for a wide variety of intermediate and finish coats. The quick dry and recoat times allow for fast turn-around of production work. The barrier protection that this product provides, as well as the rust inhibitive pigmentation, leaves a film that prevents corrosion for many years. Additionally, this product may be used as a tie coat over existing coatings that will be finished with a high performance coating. It provides corrosion resistance for both interior and exterior steel surfaces.